Free shipping UK plug smart TV Standby Killer Energy Power Saver Stand-By Television Auto cut off with infrared signal receiver |

Free shipping UK plug smart TV Standby Killer Energy Power Saver Stand-By Television Auto cut off with infrared signal receiver |

Product specifications

Voltages 220-240V~/50HZ
Current 10A/2200-2400W
Energy Saved Per Year: 0.018KWH*20H*365D=131.4KWH
Power Consumption: <0.25W

Product description

The Smart TV power saver is designed to cut down the standby power of your connected electrical appliances, including
TV,DVD, Power Amplifiers and other household electrical devices, hence reducing your energy costs and saving you
money. Your Smart TV power saver will turn off the power after you shut down all electrical appliances automatically.
The Smart TV power saver device is easy to operate. You just simply press any key on your appliance's remote control
and it will turn off the power after testing the standby current of the connected devices, it will not influence the normal
operation of other connected devices.

Operation:

1. Plug the electrical appliance's plug into the socket on the front of the Smart TV power saver. If you wish to connect more
appliances, please connect a suitable power board to your Smart TV power saver, and then plug all appliances such as a TV,
DVD and Power Amplifiers on this power board and turn the power board "ON", we suggest using a surge protected powerboard
for added protection to connected devices.
2.  Place the external IR sensor in front of your electrical appliance. Then use that appliance's remote control to
operate your Smart TV power saver. (We suggest you to place this on your television set.)
3. Your Smart TV power saver uses the IR remote control of various devices to operate, this must be done with a straight line of sight
without any obstacles between it and the internal and if required external infrared signal receiver.
You must ensure this is followed otherwise, you will encounter difficulties in operation.
4. Place your Smart TV power saver into an available wall power socket, and ensure mains power is available.
5.  Initial settings of your product. The indicator light on the front of the unit will flash after being connected to the wall power socket.
Press any key on your appliance's remote control for the learning mode to begin, please wait until the indicator light is illuminated.
6.  Set all electrical appliances connected to your Smart TV power saver to be in standby mode. After waiting for a minimum of 30
seconds, press the "ON/OFF" key on your Smart TV power saver, the indicator light will then turn off. Your Smart TV power saver
settings are now completed.
7. If you wish to change the number of connected appliances, please press the reset key on your Smart TV power saver for a period of 4 seconds continuously until the indicator light flashes to indicate clearing of the memory code. Then, repeat steps E & F as shown above for re-setting again

Noting:

The Smart TV power saver will retain it's memory after a loss of power(i.e.power cut),to re-set the learning
function, press the Manual Reset/On/Off switch for 4 seconds to clear the previously learnt remote control button.