LCD Driver Board Lvds Inverter Diy Kit for 1920X1080 LTN184HT01-T02 HDMI-compatible DVI VGA Audio | Automation Robot

M.NT68676.2A(HDMI+DVI+VGA+Audio)LCD Screen Controller Board Converter Kit for 18.4"  LTN184HT01-T02 1920X1080

    This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves.  Giving your lcd a new life with your sparkle idea.

Plug&play kit, no need soldering.

 Notice: if you want to buy this kit, please make sure that your lcd model number is LTN184HT01-T02

     Necessary Accessories for turning a bare LCD to desktop monitor:

1. LCD Controller board,
2. Inverter,
3. LVDS cable,
4. Keypad,
5. VGA cable/DVI Cable/HDMI cable, (Not includede)
6. Power Adapter. (Not included)

If you have already had a VGA cable/DVI cable/HDMI cable and a power adapter (Ouput 12V,4A -- it is for small size lcd from 5.6inch to 22inch), this kit is a great choice for you, else there are some other kind of kits for options, please feel free to contact us for suggestion.

 LCD Controller Board  M.NT68676.2A:

M.NT68676.2A is a monitor control board, which can support LED/LCD panels. It can support resolution up to 2048X1152.

M.NT68676.2A can synchronize with computer automatically. Synchronization requires the synchronous signal which horizontal and vertical sync are separated.

M.NT68676.2A can support dynamic contrast control, headphone input and digital volume control simultaneously.

Size of controller board: 139mmX58mmX17mm

Have a try and you will get great surprise!

Then, are you going to get this kit?

   Notes:

   1. Please make sure that your LCD is ok before bidding this item, else you will be responsible for the incompatibility. 

   2. If you concern much about resolution setting, please reconsider before bidding!

   3. If you are not specialized in electronics or have doubts in operation, please contact us for instruction, as we are not able to responsible for wrong operation.

   4. After finishing the connecting, please don't rush to power on! First, use multi-meter to test whether the GND of the LCD is connected with the GND of the controller board. If not, please check the connection again. If yes, please test whether there is a short circuit between the red wires and black wires of the LVDS cable. If there is a short circuit, it means opposite connection or other errors. Any problem, please feel free to contact us. DIY needs a certain professional knowledge, please kindly take the responsibility of the risk. No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.

American Friend cryalith's Raspberry PI Computer:

Australian Friend beyelka's Project:

Successful Example (rossg77 -- an American friend's Project ):

 Successful Example (radicalboy_fr -- a French friend's Project ):

Successful Example (docpot2008 -- a Canadian friend's Project ):

Malta Friend drac1977's Project:

USA  Friend loafer_tingo's Project :

Instruction to connect the controller board to the LCD:

No metal contact is allowed.

1. Take away the old inverter and old LVDS cable from the LCD panel.

2. Connect the new inverter and LVDS cable to your LCD panel.

3. Connect controller board with PC by VGA cable/HDMI Cable/DVI cable.

4. Input power of 12V,4A. ( Please don't revised the voltage jumper setting on the lcd controller board before confirmation from us, because wrong revising of this voltage will get your lcd burnt. By the way, please don't connect the lvds cable wrongly, some wrong connecton can get your lcd burnt too, if you are not sure, please feel free to contact us.)

Package Include:

• 1 X LCD Controller Board (M.NT68676.2A) programmed for LTN184HT01-T02
• 1 X Inverter
• 1 X 5 keys Keypad
• 1 X LVDS cable

      **** This kit is for LTN184HT01-T02, please understand that the title picture is for reference, we will select the right lvds cable and inverter. If your lcd is not with the same lcd model number, Please feel free to contact us with your lcd model number, we will try our best to help.

    Welcome to customize your own kit!